Carl Turner Equipment Inc

FEATURES:

• Multiple boom positions and leg extensions ranging from 49″ to 81″ provide maximum stability.

• Boom swivels 10 degrees right or left if base cannot be centered under the load.

• Floor lock secures crane from moving when in use.

• Includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.

FEATURES:

• Four position telescopic boom that folds down for traveling position or storage.

• 5 to 1 gear ratio winch with 20 foot long 1/4” diameter steel cable and hook pulls the load toward the boom.

• Winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.

• Hydraulically activated boom lifts the load to the desired height.

• Crane swivels 360 degrees but can be locked in position.

FEATURES:

• Four position telescopic boom with 3/8” proof chain and swivel mounted hook.

• 3 ton capacity hydraulic power unit provides faster raising action and a large diameter ram to withstand angle loads.

• Low profile design (4-3/4” from top of legs to ground) allows positioning under low ground clearance vehicles.

• Quick foldable legs and boom save shop space (22-1/2” x 51-3/4”) and prepare crane for transport or storage within seconds.

• 4” diameter front wheels and locking rear caster wheels provide positive steering and easy maneuvering. Locking caster wheels secure crane from moving when in use.

FEATURES:

• Designed to hook to a crane or hoist to handle and position large, bulky components.

• The horizontal tilt can be adjusted to compensate for off-center loads, or adjusted to a certain angle for a component being positioned.

• Adjustment screw can be used manually or with air tools.

• Can be used with NORCO Model 78600B or 78605A Engine Cranes.

• 5/16” Alloy Grade 80 chain.

• Position of hooks adjusts from 32” to 48”.